User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
No action required.The controller is currently shutting down.82
Shutdown In Progress
Retry the request at a later time.The device is not ready to process the request.83
Controller API Not Ready,
Try Again Later
No action required.This is a snapshot virtual disk and cannot be a
member of a Continuous Access group.
84
Is Snapshot
Modify the mirror policy and retry the request.An incompatible mirror policy of the virtual disk is
preventing it from becoming a member of a
Continuous Access group.
85
Cannot add or remove DR
group member. Mirror
cache must be active for
this Vdisk. Check
controller cache
condition.
Report the error to product support.Case 1: A virtual disk is in an inoperative state and
the request cannot be processed.
86
Command View EVA has
detected this array as
Case 2: The snapclone cannot be associated with a
virtual disk that is in an inoperative state.
inoperative. Contact HP
Service for assistance.
Case 3: The snapshot cannot be associated with a
virtual disk that is in an inoperative state.
Report the error to product support.The disk group is in an inoperative state and cannot
process the request.
87
Disk group inoperative or
disks in group less than
minimum.
Report the error to product support.The storage system is inoperative and cannot process
the request.
88
Storage system
inoperative
Resolve the condition and retry the request.The request cannot be performed because the
Continuous Access group is in a failsafe locked state.
89
Failsafe Locked
Retry the request later.The disk cache data need to be flushed before the
condition can be resolved.
90
Data Flush Incomplete
Report the error to product support.The disk group is in a redundancy mirrored
inoperative state and the request cannot be
completed.
91
Redundancy Mirrored
Inoperative
Select another LUN number and retry the
request.
The LUN number is already in use by another client
of the storage system.
92
Duplicate LUN
Resolve the condition and retry the request.
Report the error to product support.
While the request was being performed, the remote
storage system controller failed.
93
Other remote controller
failed
Correctly select the remote storage system and
retry the request.
The remote storage system specified does not exist.94
Unknown remote Vdisk
Correctly select the remote Continuous Access
group retry the request.
The remote Continuous Access group specified does
not exist.
95
Unknown remote DR
group
Resolve the condition and retry the request.
Report the error to product support.
The disk metadata was unable to be updated.96
PLDMC failed
Retry the request later.Another process has already taken the SCMI lock on
the storage system.
97
Storage system could not
be locked. System busy.
Try command again.
104 Error messages