User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
Verify that the firmware image is not corrupted
and retry the firmware download process.
The firmware image download process has failed
because of a corrupted image segment.
71
Bad image segment
No action required.The firmware version already exists on the device.72
Image already loaded
Verify that the firmware image is not corrupted
and retry the firmware download process.
The firmware image download process has failed
because of a failed write operation.
73
Image Write Error
Case 1: No action required.
Case 2: No action required.
Case 1: The operation cannot be performed because
the virtual disk or snapshot is part of a snapshot
group.
Case 2: The operation may be prevented because a
snapclone or snapshot operation is in progress. If a
74
Logical Disk Sharing
Case 3: If a snapclone operation is in progress,
wait until the snapclone operation has
completed and retry the operation. Otherwise,
snapclone operation is in progress, the parent virtual
the operation cannot be performed on this
virtual disk.
disk should be discarded automatically after the
operation completes. If the parent virtual disk has
Case 4: No action required.
snapshots, then you must delete the snapshots before
the parent virtual disk can be deleted.
Case 5: No action required.
Case 3: The operation cannot be performed because
either the previous snapclone operation is still in
progress, or the virtual disk is already part of a
snapshot group.
Case 4: A capacity change is not allowed on a virtual
disk or snapshot that is a part of a snapshot group.
Case 5: The operation cannot be performed because
the virtual disk or snapshot is a part of a snapshot
group.
Retrieve a valid firmware image file and retry
the request.
The firmware image file is not the correct size.75
Bad Image Size
Retry the request once the firmware download
process is complete.
The controller is currently processing a firmware
download. Retry the request once the firmware
download process is complete.
76
The controller is
temporarily busy and it
cannot process the
request. Retry the request
later.
Report the error to product support.The disk volume specified is in a predictive failed
state.
77
Volume Failure Predicted
Resolve the condition and retry the request.The current condition or state is preventing the request
from completing successfully.
78
Invalid object condition
for this command.
Wait for the operation to complete and retry
the request.
The current condition of the snapshot, snapclone or
parent virtual disk is preventing the request from
completing successfully.
79
Snapshot (or snapclone)
deletion in progress. The
requested operation is
currently not allowed.
Please try again later.
Resolve the condition by setting the usage to a
reserved state and 80 retry the request. Invalid
Volume Usage
Case 1: The disk volume is already a part of a disk
group.
80
Invalid Volume Usage
Report the error to product support.Case 2: The disk volume usage cannot be modified,
as the minimum number of disks exist in the disk
group.
Resolve the condition by adding additional
disks and retry the request.
The disk volume usage cannot be modified, as the
minimum number of disks exist in the disk group.
81
Minimum Volumes In Disk
Group
103