User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
Case 3: If this operation is still desired, delete
one or more of the port WWNs and retry the
operation.
Case 1: If this operation is still desired, delete
one or more of the items on the destination
storage cell and retry the operation.
Case 2: Use a smaller size and retry the
operation.
Case 1: The maximum number of items already exist
on the destination storage cell.
Case 2: The size specified exceeds the maximum size
allowed.
Case 3: The presented user space exceeds the
maximum size allowed.
60
Max size exceeded
Case 3: No action required.
Case 4: The presented user space exceeds the
maximum size allowed.
Case 4: No action required.
Case 5: Use a smaller size and retry the
operation.
Case 6: If this operation is still desired, delete
one or more of the EVA hosts and retry the
operation.
Case 5: The size specified exceeds the maximum size
allowed.
Case 6: The maximum number of EVA hosts already
exist on the destination storage cell.
Case 7: If this operation is still desired, delete
one or more of the virtual disks on the
destination storage cell and retry the operation.
Case 7: The maximum number of EVA hosts already
exist on the destination storage cell.
Case 8: The maximum number of Continuous Access
groups already exist. Case 8: If this operation is still desired, delete
one or more of the groups and retry the
operation.
Reconfigure one of the storage system controller
passwords, then use the management software
The login password entered on the controllers does
not match.
61
Password mismatch.
Please update your to set the password to match the device so
communication can proceed.system's password in the
Storage System Access
menu. Continued attempts
to access this storage
system with an incorrect
password will disable
management of this
storage system.
Wait for the merge operation to complete and
retry the request.
The operation cannot be performed because the
Continuous Access connection is currently merging.
62
DR group is merging
Wait for the logging operation to complete and
retry the request.
The operation cannot be performed because the
Continuous Access connection is currently logging.
63
DR group is logging
Resolve the suspended mode and retry the
request.
The operation cannot be performed because the
Continuous Access connection is currently suspended
64
Connection is suspended
Retrieve a valid firmware image file and retry
the request.
The firmware image file has a header checksum error.65
Bad image header
Retrieve a valid firmware image file and retry
the request.
The firmware image file has a checksum error.66
Bad image
Retrieve a valid firmware image file and retry
the request.
Invalid status for logical disk. This error is no longer
supported.
67
The firmware image file
is too large.
Image too large
Retrieve a valid firmware image file and retry
the request
The firmware image file is incompatible with the
current firmware.
70
Image incompatible with
system configuration.
Version conflict in
upgrade or downgrade
not allowed.
102 Error messages