User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
Configure the Continuous Access group
correctly and retry the request.
The operation cannot be performed because the
Continuous Access group is not in the required mode.
46
Invalid DR mode
Wait for the copying state to complete and
retry the request.
The operation cannot be performed because at least
one of the virtual disk members is in a copying state.
47
The target DR member is
in full copy, operation
rejected
Use the management software to save the
password specified so communication can
proceed.
The management software is unable to log in to the
storage system. The storage system password has
been configured.
48
Security credentials
needed. Please update
your system's ID and
password in the Storage
System Access menu.
Use the management software to set the
password to match the device so
communication can proceed.
The management software is unable to login to the
device. The storage system password may have been
re-configured or removed.
49
Security credentials
supplied were invalid.
Please update your
system's ID and password
in the Storage System
Access menu.
No action required.The management software is already logged in to the
device. (This message is informational only.)
50
Security credentials
supplied were invalid.
Please update your
system's ID and password
in the Storage System
Access menu.
Verify that devices are powered on and that
device hardware connections are functioning
correctly.
The Continuous Access group is not functioning.51
Storage system
connection down
Add one or more virtual disks as members and
retry the request.
No virtual disks are members of the Continuous
Access group.
52
DR group empty
Retry the request with valid attributes for the
operation.
The request cannot be performed because one or
more of the attributes specified is incompatible.
53
Incompatible attribute
Remove the virtual disk as a member of a data
replication group and retry the request.
The requested operation cannot be performed on a
virtual disk that is already a member of a data
replication group.
54
Vdisk is a DR group
member
No action required.The requested operation cannot be performed on a
virtual disk that is a log unit.
55
Vdisk is a DR log unit
Report the error to product support.The battery system is missing or discharged.56
Cache batteries failed or
missing.
The virtual disk member must be presented to
a client before this operation can be
performed.
The virtual disk member is not presented to a client.57
Vdisk is not presented
Report the error to product support.Invalid status for logical disk. This error is no longer
supported.
58
Other controller failed
Case 1: If this operation is still desired, delete
one or more of the items and retry the
operation.
Case 2: If this operation is still desired, delete
one or more of the EVA hosts and retry the
operation.
Case 1: The maximum number of items allowed has
been reached.
Case 2: The maximum number of EVA hosts has been
reached.
Case 3: The maximum number of port WWNs has
been reached.
59
Maximum Number of
Objects Exceeded.
101