User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
Case 4: GROUP get name: The operation cannot be
performed because the Continuous Access group does
not exist. This can indicate a user or program error.
Verify the hardware connections and that
communication to the device is successful.
A timeout has occurred in processing the request.28
Timeout
Report the error to product support.The supplied storage cell identifier is invalid. This can
indicate a user or program error.
29
Unknown ID
Report the error to product support.The supplied parameter handle is unknown. This can
indicate a user or program error.
30
Unknown Parameter
Handle
Report the error to product support.The operation could not be completed because one
or more of the disk media had an unrecoverable
error.
31
Unrecoverable Media
Error
Report the error to product support.This error is no longer supported.32
Invalid State
Verify the hardware connections,
communication to the device, and that the
management software is operating successfully.
A SCMI transport error has occurred.33
Transport Error
Resolve the condition and retry the request.
Report the error to product support.
The operation could not be completed because the
drive volume is in a missing state.
34
Volume is Missing
Report the error to product support.The supplied cursor or sequence number is invalid.
This may indicate a user or program error.
35
Invalid Cursor
Report the error to product support.The specified target logical disk already has an
existing data sharing relationship. This can indicate
a user or program error.
36
Invalid Target for the
Operation
No action required.There are no more events to retrieve. (This message
is informational only.)
37
No More Events
Retry the request at a later time.The command lock is busy and being held by another
process.
38
Lock Busy
Report the error to product support.The storage system time is not set. The storage system
time is set automatically by the management software.
39
Time Not Set
Report the error to product support.The requested operation is not supported by this
firmware version. This can indicate a user or program
error.
40
Not a Supported Version
Report the error to product support.The specified SCVD does not have a logical disk
associated with it. This can indicate a user or program
error.
41
No Logical Disk for Vdisk
Delete the associated presentation(s) and retry
the request.
The virtual disk specified is already presented to the
client and the requested operation is not allowed.
42
Logical disk Presented
Report the error to product support.The request is not allowed on the slave controller. This
can indicate a user or program error.
43
Operation Denied On
Slave
Report the error to product support.This error is no longer supported.44
Not licensed for data
replication
Configure the virtual disk to be a member of a
Continuous Access group and retry the request.
The operation cannot be performed because the
virtual disk is not a member of a Continuous Access
group.
45
Not DR group member
100 Error messages