Specifications

Selecting the Primary Network
Perform the followingsteps to select the primary network for the system. If you
are selecting a primary network for a diskkss system,select the same primary
network used by the partner node.
1.
2.
3.
4.
Stop any user processes and log out.
Shut down to the MD prompt by typing the followingat the login:
prompt
login: shut <RETURN>
T~ the followingat the MD prompt(>)
> pnet
x < RETURN>
where x corresponds to one of the followingvalues:
e for 802.3network
rtl for Apollo Token Ring network with network controller O
rl for A 110Token Ring network with network controller 1
YtOfor 80 5 network with network controller O
tl for 802,5network with network controller 1
If the system uses two Apollo Token Ring or 802.5network controller
boards, you must specifycontroller O(ro or tO)or controller 1(rl or tl)
as the primary controller. The default is O.
T~ the pnet command to confirm the primary network
> pnet <RETURN>
You receive the followingsystem message:
APOLLO TOKEN RING : CONTROLLER = O
l%e
example displayshows that the primary netwdc is set to controller
Ofor the Apollo Token Ring network.
W@uration
3-35