Specifications

Configuring the EEPROM on Domain Compatible
Mode Systems
This section deseribes how to select Domain Compatible mode, netwmk riority,
●
and clockspeed for systemsthat run Domain/OS. The system EEPRO#s.tores
this information.
●
●
●
✎
Youmust configure the EEPROM if any of the followingevents occtm
You have replaced the systemEEPROM with a
new EEPROM that is
●
not configured correctly
The EEPROM mode configuration is corrupted, possiblybecause of
electrostatic discharge when handled
without using a grounding strap.
●
A Domain/OS systemships from the factory with an incorrectlyconfi-
gured EEPROM.
Refer to the appropriate subsection for your selected task.
Selecting Domain Compatible Mode
Perform the followingsteps to configure the system to run in Domain Compat-
ible mode.
1. Turn on the system unit.
2 Perform the appropriate substep according to the type of displayon the
screen
3-32 Configuration