Specifications

●
Auto System Select Mode for HP-UX Compatible
Mode Systems
Perform the followingsteps to use the Auto SystemSelect mode
●
1.
●
3.
4.
5.
6.
7.
●
●
●
If you have already booted an operating system,log out and stop any
user processes
If not, go to step 2
Reset the system unit and get the power-up display.Then, when the
keyboard is identified, type the followingcommand
C <Return>
From the Configuration Control Menu, type the followingcommand to
get the Auto SystemSeleet Menu:
2 <Return>
From the Auto System Select Menu, type the number key for the op-
tion
status you want to change
&q <Return>
To execute the menu, type the followingcommand
E <Return>
If you set the menu to select a system, the system unit resets and dis-
plays the availableoperating systemsin the upper right-hand comer of
the dkplay. Select the operating system you want to bed by typing the
number and letter key for the system:
key
key c Return>
If you set the menu to store the selected system,the path to that oper-
ating system is stored. The next time the systemunit is turned on, that
operating system boots.
Configuration 3-29