Specifications

When you replace a failed EEPROM, or if the EEPROM has been corrupted,
perform the appropriate bulleted step
● For systemsthat use Domain Compatible mode, perform the following
steps
1. Use the Boot ROM configuration program to select Domain Com-
patible mode, the primary network for the system, and at SR1O.3
PSK8,the bus clockspeed.
2. Run the Chuvol utility.
. For systems that use HP-UX Compatible mode, use the 13mt ROM
eonfiguration program to perform the followingsteps
1.
2.
3.
Seleet HP-UX Compatible mode.
Set the Auto System Select and 1/0 Configuration modes to their
previous configurations.
Change the LAN ID in the cluster configuration file to that of the
new EEPROM.
NOTICE:
Because the EEPROM stores the node ID, applica-
tion software for Domain/OS systemsthat rely on
the node ID for licensing requirements may not
function after you replace the EEPROM.
Configuration 3-27