Specifications

● Cotilguration

This chapter rovideaconfiguration information for Series 400workstations and

workstation I&Us.

●

Workstation and System Unit Configurations

Refer to the HPAPoI1o 9000 Series 400 Suppoti Mattir for a @replete list of sup-

ported aceeasories,peripherals, and operating systems.

●

FRU Configurations

The followingsubsections define the jum r and switchconfi~rations for sys-

tem boards and internal storage devices.

efer to the appropriate figure for mn-

figuration information for the FRU that you’re replacing.

NOTICE:

Series 400system units do not use SCSI bus termi-

nators on internal storage drives.No third-party

internal storage devieescan use terminator bexxuse

other storage drives may not function properly. Re-

fer to the third-party massstorage device’sdwu-

mentation for instructions.

CPU Board Configurations

Figure 3-1 showsthe jumper locations for Series 400CPU boards without inte-

~ted graphia. Figure 3-2 show the “um~r locations for the CPU board with

integrated graphica. Refer to Table 3- to find the clockspeeds of these CPU

boards for the various Series 400systems.

Configuration 3-1