Specifications

●
8. Ifyouwant to listthe filenames for a specificce.utilitytest in a newfile,type
the followingcommand:
Iifcp -r /dev/dn”ve:filenamel - I cpio -ictv [ > fiename2] <Return>
where dn”veis the device file name of the tape drive
jifenamel is one of these sixce.utilities tes~
CRTADJ
FLOAT
Ecc
CS80
SFT
VME
jWmmm.2is the name of the file in which you want to list the files.
a
9. To list the files,type the followingcommand
more jVetuvne2 <Return>
10. To find out what ce.utilities tests are alreadyon the HP-UX operating sys-
tem, type the followingcommands
cd /usr/dia#CE.utilities <Return >
1s <Return>
11. If you want to run a test that is not alreadyon HP-UX, you must firstcopy
the test from the tape to the HP-UX file system. A new directory,
/usr/CE.utilities; is automaticallycreated and the tiles from the tape are
impied into it. Type the followingcommand
Iifcp -r /dev/dnve:krf - I cpio -icdvxm <Return >
where dn”veis the devicefile name of the tape drive
terf is one of the eight test filesyou want to copy from the tape to the file
system.
Information on each w.utility test maybe found as follows
●
●
●
m“
●
●
CRTADJ Refer to System Support T~e User’sGuide.
(2S180:
Refer to the Sen”er300 Tat TWISManuul.
NOTICE:
If the CW80testisrun insingle
user mode, the
system halts
when the exerciser is stopped.
You must reboot HP-UX to continue.
FLOAT T~ the followingcommands and a help file appears on the
~mfi,-
cd
/usr/CE.utilities/Floatcard c Return >
./help <Return >
SIW Refer to the Series 300
Tat Twls Manual.
Diagnostics 5-15