Specifications

Using the HP-UX ce.utilities
Perform the followingsteps to select and
run ce.utilities on HP-UX systems.
1.
2
3.
4.
5.
6.
7.
5-14
If not alreadyconnected, cmnneeta tape drive to the systemfor the System
Support Tape.
Verify
the system unit is in the HP-UX compatible mode.
Refer to Appendix C of
Setvicing the HP Apollo 9000 Series 400 Models
400dl, 400t, 425t, 400s, 425s, 433s for detailed instructions.
From the Auto S tern Select Male, note the
tape drive with the System
r
Support Tape vat these operating systems:
SYSTEM_SF
sYsTEM_s3
If ou want to run the Series XXI System Functional Tats, select
SY~TEM_SF as the temporary operating system to Mot.
Ifyouwant to run the Series300Computer Tests,selectSYSTEM_S3asthe
temporary operating system to boot.
Refer to the
System Support Tqe User’sGuide and the Seritx300 Ttit Tmls
MunuuJ
for detailed instructions.
To continue and run specificce.utilities tests, boot the HP-UX operatin
R
s tern. The remaining steps of thisprocedure can onlybe performed W
rt e HP-UX operating system
running.
To list all testson the tape,
T
the followingcommand, where
drive is the
device file name of the tape rive:
Iifls Idevldnve <Return >
To find out what files are available for a certain test, type the following
command:
Iifcp -r Idevldn”ve:filenamel - I cpio -ictv <Return >
wherejilenamel is one of these sixce.utility tests:
CRTADJ
FLOAT
ECC
csao
SFT
WE
drive is the device file name of the tape drive.
Note that the HP 98720Aand HP98730Atests are not supported on Series
400system units.
Diagnostics