Specifications

Using the Boot ROM Test Mode for HP-UX Systems
Perform the followingsteps to select and run self Testson HP-UX systems.
1.
2
3.
4.
When our display’slastlinesshowthe followingmessage,youean start the
d
Ttit ode
RESET to Power-UP,
SPACE to clear input
Wait
ing for
system Selection ?
Tjpe the command:
T <Return>
The followingself Test Controls Menu appears.
Self Test Controls
Keys Test Option
Seleoted
-----------------------------
1 Cent inuous
N
2
Extended
N
3 Test Uenory
Y
D
set Defaults
R
Run Tests
-----------------------------
Type
[key ] RETURN?
T~ the command key to set the status for the test you want to run
kqy <Return>
Continuous testing causes the bmt ROM to repeat the self-test.
Extended testin invokesa longer memory test and enables the LAN and
dSCSI tests. S tests are
for external SCSI devicxxonly. If an external
MAU is not connected for AUI interfa=, the test reports a failure.
Tat Memory may be disabled by setting it to N.
To run the self-tests, type the followingcommand
?.-< ?.etwa>
The self-tests running in Extended or Tat Memory mode automatically
stop when the finish and the system unit then goes into tmot mode.
/
i
Continuous Se f-Testsarerunning, theymaybestopped byresettingthe sys-
tem unit or eyciingpower.
Diagnostics
5-13