Owner's manual

Figure 38 Battery s tatus indicators
1. Status indicator 2. Fault indicator
3. Battery 0
4. Battery 1
Removing a battery
1. Remove th
e front panel (1, Removing a battery) by grasping the panel at each end pulling it off the
enclosure.
2. While moving the battery mounting latch (2, Removing a battery )totheright,pullthebatteryoutof
the enclo
sure (3) . Suppor t the battery with both hands as it is removed.
3
1
2
0180a
Figure 39 Removing a battery
Installing a bat tery
• Position the battery as high in the slot as possible, then slide the batter y into the enclosure (1,
Figure 40) until it is fully seated and the mounting latch engages (2).
92
Customer replaceable units