Owner's manual

2
CXO7589A
1
Figure 35 Raising a leveler foot
1. Hex nut
2. Leveler foot
3. Carefully m ove the rack to the installation a rea and position it to p rovide the necessar y service
areas (see Figure 34).
Tostabilizetherackwhenitisinthefinal installation location:
1. Use a wren
ch to lower the foot by turning the leveler foot hex nut clockwise until the caster does
not touch
the floor. Repeat for the other feet.
2. After lowering the feet, check the rack to ensure it is stable and level.
3. Adjust the feet as necessary to ensure the rack is stable and level.
4000/6000/8000 Enterprise Virtual Array user guide
85