Owner's manual
NOTE:
SSSU version 4 is required for HP Command View EVA 4.0 and later. For more information on using
SSSU, refer to the
HP StorageWorks Storage System Scripting Utility reference
, which can be downloaded
from the following web site:
h
ttp://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html
Click Support & Documentation.
1. Run SSSU on the platform and operating system of your choice.
2. Enter SELECT MANAGER and select the management server.
3. Enter SHOW SYSTEM to determine which storage systems are managed by this instance of HP
Command View EVA.
4. Enter SELECT SYSTEM to select the appropriate storage system from which to collect configuration
data.
5. Enter CAPTURE CONFIGURATION, specifying the full path and filename of the output files for
the configuration data.
The configuration data is stored in a series of from one to five files, which are SSS U scripts. The
file names begin with the name you choose, with the restore step appended. For example,
if you specify a file name of LargeEVA.txt,theresultantconfiguration files would be
LargeEVA_Step1A.txt, LargeEVA_Step1B,etc.
The c ontents of the configuration files can be viewed with a text editor.
NOTE:
If the storage system contains disk drives of different capacities, the SSSU procedures used do not
guarantee that disk drives of the same capacity will be exclusively added to the same disk group. The use
of this method does not ensure that there will be only disk drives of the same capacity in each disk group.
The foll
owing examples illustrate how to save and restore the storage system con figuration data using
SSSU on a Windows host.
Example 1. Saving configuration d ata usin g SSSU on a Windows Host
Run SSSU from a DOS Command Window on the SMA, a Windows Workstation or a Windows Server
that can
access the SMA by TCP/IP or the managem ent host running Command View.
1. Click Run on the Window Start menu.
2. Enter cmd in the Op en field to open the DOS Command Window.
3. Change
to the directory (CD) in which you have installed SSSU. For example, C:> cd \SSSUDir
4. Enter SSSU to run the application.
5. Enter SELECT MANAGER <SMAname or ip_addr> user=<username> pass=<userpass-
word>
.
6. Enter SHOW SYSTEM to display the EVA storage systems managed by the SMA or Windows Host.
7. Enter SELECT SYSTEM <EVA_Name>,whereEV A_name isthenameofthestoragesystem.
The storage system name is case sensitive. If there are spaces between the letters in the name, quotes
must enclose the name. For example, SELECT SYSTEM “Large EVA”.
8. Ente
r CAPTURE CONFIGURATION <pathname\filename>,wherepathname identifies the
location where the configuration files will be saved, and filename is the name used as the prefixfor
the configurations files. For example, CAPTURE CONFIGURATION c:\EVAConfig\LargeEVA
9. Enter EXIT to close the DOS Command Window.
38
Enterprise Virtual Array operation