Owner's manual
1. When the Fault Management display is active (flashing), press to select the D etail View m enu.
The LTEA selection menu is active (LTEA 0 is displayed).
2. Press
or to incr
ement to a specificerror.
3. Press
to obser
ve data about the selected error.
Interpreting fault management information
Each version of HP Command View EVA includes an ASCII text file that defines all the codes that the
authorized service representative can view either on the GUI or on the OCP.
IMPORTANT:
Thisinformationisfortheexclusiveuseoftheauthorizedservicerepresentative.
The file name identifies the controller model, fi le type, XCS baselevel id, and XCS version. For example,
the file name hsv210_event_cr08d3_5020.txt provides the following information:
• hsv210_—The EVA controller model number
• event_—The type of information in the file
• w010605_—the base level build string (the file creation date).
• 01—creation year
• 06—creation month
• 05—creation date
• 5020—The XCS version
Table 50 descri bes types of information available in this file.
Table 50 Controller event text description file
Information type
Desc riptio n
Event Code
This hexadecimal code identifies the reported event type.
Termination Code (TC)
The hexadecimal code specifies the condition that generated the
termination code. It might also define either a system or user initiated
corrective action.
Coupled Crash Control Codes
This single digit, decimal character defines the requirement for the other
controller to initiate a coupled crash control.0. Other controller SHOULD
NOT complete a coupled crash.1. Other controller SHOULD complete a
coupled crash.
Dump/Restart Control Codes This single decimal character (0, 1, 3) defines the requirement to:0.
Perform a crash dump and then restart the controller.1. DO NOT perform
a crash dump; just restart the controller.3. DO NOT perform a crash
dump; DO NOT restart the controller
Corrective Action Codes (CAC)
These hexadecimal codes supplement the Termination Code information
to identify the faulty element and the recommended corrective action.
Software Component ID Codes
(SWCID)
These decimal codes identify soft ware associated with the event.
Event Information Packets (EIP) These codes specify the packet organization for specifictypeevents.
4000/6000/8000 Enterprise Virtual Array user guide
145