Owner's manual

Figure 54 Installing a power supply
V erifying proper operation
After replacing the power supply or blower, check the following to verify that the component is operating
properly:
NOTE:
It may take up to 10 minutes for the component to display good status.
• Make sure the blower begins operating immediately.
• The status indicator shou ld be on.
• From Command View EVA
• Navigate back to the component and check the status. It should be
.
• TurnoffthelocatefunctionbyclickingLocate > Locate Off
Returning the failed component
Please follow the return instructions provided with the n ew component.
4000/6000/8000 Enterprise Virtual Array user guide
105