Specifications

Installing a 3.5-inch drive
1. Prepare the computer for disassembly (Preparation for disassembly on page 41)
2. Remove the access panel (
Access panel on page 42)
3. You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket
similar to the example shown below.
●
Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
●
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket
screws through the sides of the bracket into the drive.
Drives
69