Specifications

Front I/O assembly
Description Spare part number
Front I/O assembly 745037-001
1. Prepare the computer for disassembly (Preparation for disassembly on page 90).
2. Remove the access panel (
Access panel on page 91).
3. Remove the front bezel (
Front bezel on page 92).
4. Rotate the drive cage to its upright position.
5. Cut the plastic tie that secures the longer cable to the power supply.
6. Disconnect the cables from the system board as follows:
●
Yellow connector labeled FRONT USB
●
Blue connector labeled FRONT USB 3.0
●
Blue connector labeled FRONT AUD
120 Chapter 6 Removal and replacement procedures: Small Form Factor