User's Manual

Table Of Contents
4. Gently pull out any jammed paper in the duplex
area on the right door.
5. If paper is visible entering the bottom of the fuser,
gently pull downward to remove it.
6. Paper could be jammed inside the fuser where it
would not be visible. Grasp the fuser handles,
squeeze the release levers, lift up slightly, and then
pull straight out to remove the fuser.
NOTE: The fuser can be hot while the
printer is in use. Wait for the fuser to cool before
handling it.
218 Chapter 9 Solve problems ENWW