User's Manual

A Technical specifications 19
Energy saver feature
The monitors support a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off,
and the power light is turned orange. When the monitor is in the reduced power state, the
monitor will utilize 0.5 watts of power. There is a brief warm-up period before the monitor will
return to its normal operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes
called power management features).
NOTE: The above power saver feature only works when the monitor is connected to a computer
that has energy saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor
to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver
utility causes the monitor to enter the reduced power state, the power light blinks amber.