User's Manual

2 Using the Monitor 13
2. Select Auto-Sleep Mode.
3. Select Off.
Adjusting Low Blue Light Mode
Decreasing the blue light emitting from the display reduces the blue light exposure to your eyes.
The monitor provides a setting to reduce blue light output and create a more relaxing and less
stimulating image while reading content on the screen. To adjust your monitor to a comfortable
viewing light, follow the steps below.
1. Press the Viewing Mode button.
2. Select your desired setting:
• Low Blue Light: TUV certified. Reduces the blue light for improved eye comfort
• Night: Adjusts to the lowest blue light and reduces the impact on sleep
• Reading: Optimizes blue light and brightness for indoor viewing
3. Select Save and Return to save your setting and close the Viewing Mode menu. Select
Cancel if you don’t want to save the setting.
4. Select Exit from the Main menu.
WARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes
proper workstation setup and provides guidelines for posture and work habits that increase your
comfort and decrease your risk of injury. It also provides electrical and mechanical safety
information. This guide is located on the web at http://www.hp.com/ergo.