User Manual

2 Using the Monitor 11
2. Using the Monitor
Downloading the monitor drivers
You can download the latest version of .INF and .ICM files from the HP monitors support Web
site.
1. Go to http://www.hp.com/support.
2. Select Find your product.
3. Follow the on-screen instructions to download the software.
Using the On-Screen Display (OSD) menu
Use the On-Screen Display (OSD) menu to adjust the monitor screen image based on your
preferences. You can access and make adjustments in the OSD menu using the buttons on the
bottom side of the monitor’s front bezel.
To access the OSD menu and make adjustments, do the following:
1. If the monitor is not already on, press the power button to turn on the monitor.
2. To access the OSD menu, press one of the four bezel buttons to activate the buttons. Then
press the Menu button to open the OSD.
3. Use the three function buttons to navigate, select, and adjust the menu choices. The on-
screen button labels vary depending on which menu or submenu is active.
The following table lists the menu selections in the OSD menu.
Main Menu Description
Brightness Adjusts the brightness level of the screen. The factory default is 90.
Contrast Adjusts the contrast level of the screen. The factory default is 80.
Color Control Adjusts color temperature, viewing modes, and user color preference.
Input Control Selects the video input signal.
Image Control Adjusts the screen image and response time.
Power Control Adjusts the power settings.
Menu Control Adjusts the on-screen display (OSD) and function button controls.
Management Returns all OSD menu settings to the factory default settings.
Language Selects the language in which the OSD menu is displayed.
The factory default is English.
Information Displays important information about the monitor.
Exit Exits the OSD menu screen.