User's Guide

removemigration
Removes migration.
DESCRIPTION
The removemigration command clears completed or abort prepared migrations.
Active/Incomplete migrations cannot be removed.
PARAMETERS
DescriptionMandatory/OptionalParameter
Number that represents a migration in
completed/aborted state.
Mandatorymigrationid
EXAMPLES
removemigration –migrationid 1122334456
> SUCCESS: The specified migration is successfully removed.
removesource
DESCRIPTION
The removesource command removes already added source storage systems. Sources cannot
be removed if there is an active migration. Migrations must be completed or aborted to be removed.
PARAMETERS
DescriptionMandatory/OptionalParameter
WWN (World Wide Name).Mandatoryuid
Type of storage system:Mandatorytype
VNX
CX4
VMAX
EXAMPLE
>removesource –uid 50060160BEE0177F –type VNX
showconnection
DESCRIPTION
By default, the showconnection command shows a map of all connected source and destination
storage systems. There should be 1:1 mapping between source and destination storage systems
and destination and source systems for peer port FC connection. Given a source storage system,
this shows all the configured destination storage systems it can see and vice versa. However, the
parameters, –source and –destination cannot be used together.
80 HP 3PAR Online Import Utility for EMC Storage: Commands