User's Guide

>SUCCESS: Migration job submitted successfully. Please check status/details using
showmigration command.
Migration id: 1400939745313
help
DESCRIPTION
Global help command for the HP 3PAR CLI.
PARAMETERS
None.
Abstract
The help command displays available HP 3PAR CLI commands together with short descriptions.
EXAMPLES
>help
CLI provides following commands
showsource – List the source storage systems that are already
added to be treated as source for a migration job. It shows empty table if no
source storage systems found.
showmigration - This command displays the list of available migrations
removemigration - Removes the migration identified by the Migration
ID specified.
startmigration - Start prepared migration OR restart a prepared migration.
removesource - Removes already added source storage system & clears
all related migrations.
addsource - Add a source storage system that is intended to be migrated.
showconnection - This command displays connection between all the configured
source and destination storage systems. –source or –destination can’t be used together.
createmigration - This will perform preparation phase of a migration.
Actual data transfer will not be triggered by this command. This does following
for a given set of source volumes while presenting to 3PAR destination storage system.
installcertificate - Installs certificate from given server IP
removedestination - Removes already added destination storage system & clears
all related migrations.
help - Global Help Command for CLI
showdestination - List the destination storage systems that are already
added to be treated as destination for a migration job. It shows empty table
if no destination storage systems found.
adddestination - Add a destination storage system that is intended
to be migrated.
showmigrationdetails - This command displays the list of volumes associated
with the specified migration and their corresponding status
Help on a specific <command> can also be obtained by typing “<command> -help"
>
installcertificate
Installs certificate from a given server IP.
DESCRIPTION
The installcertificate command Installs certificates from the specified storage system. This
command is executed to add source or destination HP 3PAR StoreServ storage systems in a secure
manner. The command fetches and displays certificate details for the specified array.
78 HP 3PAR Online Import Utility for EMC Storage: Commands