User's Guide

DescriptionMandatory/OptionalParameter
Options are:
• true
• false
EXAMPLE
>addsource -type VNX -mgmtip 10.10.10.10 -user admin -password adminpw -uid
xxxxxxxxxxxxxxxx
>SUCCESS: Added source storage system.
NOTE: Issuing the addsource –help command displays the following results:
>addsource –help
Command
addsource
Syntax
addsource -type <3PAR> [-name|uid <name|uid>] -mgmtip <ip address|FQDN> -user
<user name>
-password <password> [-port <port number>] [-secure <true|false>]
addsource -help
Description
Add a source storage system that is intended to be migrated.
-port : Port number on which management application accepts
request to connect & provide source storage system
details. If not found default based on storage
system type will be used.
-secure : True/False. This enables or disables secure channel
communication with source storage system, wherever
applicable. Default value will be false or default
used by source array communication layer.
-password : Plain text password to be used.
-mgmtip : IP address of the management station to connect
to get details.
-uid : 64 bit hyphenated WWN to identify the storage
system. This is required especially when there
are multiple storage systems managed undere same
IP address
-name : Friendly name of the storage system.
-user : Username to be used to connect to management application.
-type : Storage system family type. Example: 3PAR.
Example
addsource -type 3PAR -name 3PAR1 -mgmtip 10.0.0.3 -user administrator -password
exposedpwd -port 2380 -secure true
>
Note that, for the HP 3PAR Online Import Utility for EMC Storage, the valid values for the type
parameter are VNX, CX, or VMAX.
addsource 75