User's Guide

addsource
DESCRIPTION
The addsource command adds a source storage system to the HP 3PAR Online Import Utility that
is intended to be migrated.
PARAMETERS
DescriptionMandatory/OptionalParameter
Storage system family name:Mandatorytype
VNX
CX
VMAX
After the following “EXAMPLE” table,
see the “NOTE” about the type
parameter in HELP.
Name of the storage system or serial
number or 64 bit
Optionalname
hyphenated/non-hyphenated WWN to
identify the storage system. This is
required especially when there are
multiple storage systems managed
under the same IP address.
Name of the storage system or serial
number or 64 bit
Optionaluid
hyphenated/non-hyphenated WWN to
identify the storage system. This is
required especially when there are
multiple storage systems managed by
the same SMI-S server.
IP address of the SMI-S provider that is
managing storage system that is being
added.
Mandatorymgmtip
User name for SMI-S provider that is
managing storage system that is being
added.
Mandatoryuser
Password for the user of the SMI-S
provider that is managing the storage
system being added.
Mandatorypassword
Port number on which management
application accepts request to connect
Optionalport
and provide source storage system
details.
Mandatory if secure flag is used to set
non-default.
SMI-S port defaults are:
secure port 5989
unsecure port 5988
This enables or disables secure channel
communication with source storage
system.
Optionalsecure
74 HP 3PAR Online Import Utility for EMC Storage: Commands