User's Guide

11 HP 3PAR Online Import Utility for EMC Storage:
Commands
This chapter provides reference to HP 3PAR Online Import Utility CLI commands that are used
during online import.
adddestination
Adds a destination system.
DESCRIPTION
The adddestination command adds a destination storage system to the HP 3PAR Online Import
Utility that is intended to be migrated.
PARAMETERS
DescriptionMandatory/OptionalParameter
IP address of the management station
to connect to get details.
Mandatorymgmtip
User name to be used to connect to
management application.
Mandatoryuser
Plain text password to be used.Mandatorypassword
Storage system family type like 3PAROptionaltype
Name of the storage system or serial
number or 64 bit
Optionalname
hyphenated/non-hyphenated WWN to
identify the storage system. This is
required especially when there are
multiple storage systems managed
under same IP address.
Name of the storage system or serial
number or 64 bit
Optionaluid
hyphenated/non-hyphenated WWN to
identify the storage system. This is
required especially when there are
multiple storage systems managed
under same IP address.
Port number on which management
application accepts request to connect
Optionalport
and provide source storage system
details. If not found, default based on
storage system type will be used.
True/False. This enables or disables
secure channel communication with
Optionalsecure
source storage system, wherever
applicable. Default value will be false
or default used by source storage
system communication layer.
EXAMPLES
>adddestination -mgmtip 10.21.19.23 -user 3pardst -password 3parhelp -type 3PAR
>SUCCESS: Added destination storage system.
adddestination 73