User's Guide

1. From the HP 3PAR Online Import Utility, execute the adddestination command.
Example 50 adddestination command
>adddestination –mgmtip 10.10.10.10 –user 3paradm –password 2Password
>SUCCESS: Added destination storage system
2. Execute the showdestination command to verify the destination storage system information.
Example 51 showdestination command
>showdestination
NAME TYPE UNIQUE_ID FIRMWARE MANAGEMENT_SERVER
OPERATIONAL_STATE PEER_PORTS
3par_7200_DCB_01 3PAR 2FF70002AC005F91 3.2.1 10.10.10.10 Normal
2021-0202-AC00-5F91(0:2:1) 2121-0202-AC00-5F91(1:2:1)
Creating the Data Migration Task
To create the data migration task, follow these steps:
1. From the HP 3PAR Online Import Utility, execute the createmigration command.
The command performs the following checks before creating the migration:
• No existing migration task for specified source storage system:
◦ There can only be one migration provisioned at a time per source EMC Storage
system.
• The source storage system group configuration is valid.
◦ The volume(s) specified in the createmigration command are mapped to a
storage group on the associated source EMC Storage system. All LUNs in the mapped
storage group will be migrated even if only a subset are entered in the
createmigration command. Refer to “Migrations Supported by HP 3PAR Online
Import Utility for EMC Storage” (page 24) to determine if your configuration is valid.
• EMC SMI-S Provider version.
• Source storage system model number.
NOTE: See the HP SPOCK website for the latest supported versions:
HP SPOCK (http://www.hp.com/storage/spock)
• LUN migration eligibility:
Protocol must be Fibre Channel.◦
◦ Replication LUN cannot be migrated.
Example 52 createmigration command
>createmigration -sourceuid 50067890C6E059EE -srcvolmap [{"EMC_10"}] -destcpg "FC_r5" -destprov full
-migtype offline
>SUCCESS: Migration job submitted successfully. Please check status/details using showmigration command.
Migration id: 1395864499741
NOTE: Be aware, the createmigration command may take several minutes to complete.
68 Performing Offline Data Migration