User's Guide

Elements for Addresses
IP address or hostname or array id 0 (blank to quit): <IP address of SPA>
IP address or hostname or array id 1 (blank to quit): <IP address of SPB>
IP address or hostname or array id 2 (blank to quit):
Address types corresponding to addresses specified above.
(1=URL, 2=IP/Nodename, 3=array ID)
Address Type (0) [default=2]:
Address Type (1) [default=2]:
User: <Global Administrator>
global administrator user for CX4 array
Password [null]: <password>
++++EMCAddSystem++++
OUTPUT : 0
Output codes are shown in the following table:
Success0
Not Supported1
Unknown2
Timeout3
Failed4
Invalid Parameter5
Job Queued4096
Size Not Supported4097
6. Use the dv command to verify the storage system is discovered.
NOTE:
If your EMC SMI-S Provider has client IP filtering enabled, you need to add the IP address of the
HP 3PAR Online Import Utility server to the trusted IP address list.
To add an HP 3PAR Online Import Utility server to the EMC SMI-S Provider trusted IP address list:
1. Log into SMI-S ECOM administration page using one of the SMI-S user and password
configured:
• https://<SMI-S IP address>:5989/ECOMConfig
• http://<SMI-S IP address>:5988/ECOMConfig
2. Select the Client IP Filtering link on the ECOM Administration page.
3. Add the HP 3PAR Online Import Utility server IP address in the Trusted client’s IP field on the
Client IP Filtering page and click Execute to complete.
Installing the HP 3PAR Online Import Utility for EMC Storage
These steps describe the process for installing the HP 3PAR Online Import Utility. The HP 3PAR
Online Import Utility software can be obtained from the HP Software Depot using the following
link:
Installing the HP 3PAR Online Import Utility for EMC Storage 17