Software Suite for Oracle Instruction Manual

3.7
Installing Recovery Manager on Solaris Systems
Recovery Manager for Oracle User’s Guide
3.5.1 Starting Installation
To install 3PAR Recovery Manager on a Solaris system:
1 Log on as the
root user.
2 Insert the 3PAR Recovery Manager CD into a CD-ROM drive.
If the CD is not mounted automatically, you will need to mount it manually.
3 Change to the CD-ROM drive.
4 Use the
pkgadd command as follows:
You will be prompted to answer several questions about creating the installation area and
the
setuid files to be installed.
3.5.2 Verifying Installation
To verify 3PAR Recovery Manager installation on a Solaris system:
1 Log in as the
root user.
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2/cdrom
# cd /cdrom/cdrom0
# pkgadd -d . VCDBAora
NOTE: Install the following two patches if applicable:
◆ Solaris 5.9 SSH requires patch 114356-05, or higher.
◆ Solaris 5.10 requires patch 119130-26, or higher.
The following commands can be used to verify whether the patches are installed
or not:
◆ showrev -p | grep 114356
◆ showrev -p | grep 119130