Software Suite for Oracle Instruction Manual

6.21
Command
Recovery Manager for Oracle User’s Guide
OPTIONS
The following options are supported:
■ -s <oracle_sid> - The instance ID of the primary database. For an RAC database, any
instance SID can be specified.
■ -p <primary_host> - The corresponding host name of the primary host where the
specified Oracle database instance is running. The value of the primary host name must
match the output of the
hostname command.
■ -t <timestamp> - The timestamp of a virtual copy. It is also the name of the virtual copy.
The virtual copy name can be obtained using the vcdba_display command.
■ -r <alt_host> - The alternate backup host name.
■ -l <alt_tpd_hostname> - The TPD hostname is the hostname defined on the InServ
Storage Server, which represents the alternate backup host. The
showhost command lists
all available TPD host names.
■ -e alt_tpdpwfile|alt_tpdusername
◆ alt_tpdpwfile - The location of the 3PAR InServ Storage Server client password file
that will be used by Recovery Manager to access the InServ Storage Server from the
alternate backup host. The password file can be created using InForm CLI
setpassword command.
◆ alt_tpdusername - The 3PAR InServ Storage Server username that will be used by
Recovery Manager to connect to the InServ Storage Server from the alternate backup
host. The InServ Storage Server user can be created using the InForm CLI
createuser
command. The created user must have
edit or above privilege.
◆ If the InForm CLI is configured to allow access from the alternate backup host to the
InServ Storage Server, then alt_tpdpwfile must be specified. If SSH is configured to
allow access from the alternate backup host to the InServ Storage Server, then
alt_tpdusername must be specified.
■ -v - Runs the command in verbose mode to display useful messages.