Software Suite for Oracle Instruction Manual

5.10
Performing Periodic Remote Copy
Recovery Manager for Oracle User’s Guide
5.5 Performing Periodic Remote Copy
To perform periodic Remote Copy from the menu-driven application:
1 On the 3PAR Recovery Manager for Oracle main menu, select option 5, Remote
Copy Administration.
2 Select menu option 1, Periodic Synchronization.
3 Select a database to begin synchronization.
4 When prompted, select
o (online) or f (offline).
The periodic synchronization is started. You cannot start a new periodic synchronization
until the current one finishes.
If you attempt another synchronization before the current operation completes, Recovery
Manager returns an error. Issue the
showrcopy command either from the primary/local
InServ Storage Server, or from the secondary/remote InServ Storage Server to check the
synchronization status (see the InForm OS Command Line Interface Reference for more
information about the
showrcopy command).
Synchronization completion time varies depending on data changes, IO, and network
traffic.