User's Manual

RMExch mount
SYNTAX
RMExch mount -s <ExchangeServer> -g <StorageGroup> -t <Timestamp>
-h <Hostname> [-mp “mountpoint”] | [-domain <DomainName>]
DESCRIPTION
The RMExch mount command mounts a virtual copy created by the RMExch create command.
When using RMExch mount command to mount a virtual copy, the program will check to see if
the virtual copy is already mounted to a host machine. The virtual copy must have an “Available”
status, before it can be mounted
PARAMETERS
The following options are supported:
• -s <ExchangeServer>- The name of the Exchange server for which the storage group
belongs.
• -g <StorageGroup> - The name of the storage group for which the virtual copy timestamp
belongs.
• -t <Timestamp> - The timestamp of the virtual copy to mount.
• -h <host> - Windows host name to mount the virtual copy. The target host must have
recovery manager installed.
If you are using a multiple domain configuration and the Windows host is not in the local
domain, use the -h option to specify the fully qualified domain name (FQDN) of the host’s
domain.
• -mp "mountpoint" - Optional - Quotation enclosed mount point, if you prefer to mount the
volume(s) elsewhere besides default directory. Full path is required. Default is to mount to
<System Drive>:\3parsnapshot.
• -domain <DomainName> - Optional. Specifies the domain to which the Exchange server
or storage group belongs.
If this option is not specified, Recovery Manager uses the local domain.
NOTE: Use quotes ("") where spaces are included.
NOTE: The <InServHost> is the host name defined in the HP 3PAR Storage System. Available
host names defined in the system can be listed by executing the HP 3PAR InForm CLI showhost
command.
NOTE: The -expose option was deprecated in release 3.1.1.
Examples
The following command will mount the virtual copy 020405162103 to the directory d:\Rmmount.
RMExch mount -s bottlenosed -g sg2 -t 020405162103 -h bottlenosed -mp
"d:\RMmount"
64 Using the Recovery Manager CLI