User Manual

6 Troubleshooting
SolutionProblem
• Check OA and VSM for status alerts to identify the problem.
• See Chapter 2 on page 11 for LED definitions.
Amber LED on Switch
Verify the power up sequence and allow sufficient time for each compon-
ent to power up. Verify cabling from the switch to the storage enclosures.
For more information about cabling, see “Cabling the
switch” on page 17.
Storage not ready during POST
(blade)
nl
OR
nl
Controller lockup during POST
Verify the power up sequence and allow sufficient time for each compon-
ent to power up.
VSM application is not accessible
Verify that the P700m SAS controller is installed in the correct server
mezzanine slot. The switch must be in the correct interconnect bay based
on the mezzanine slot configuration. For more information, see Chapter
7, page 33.
Unable to access the storage
3Gb SAS BL Switch User Guide 31