Owner manual

The following devices are used in this example:

ModelDevice type

c7000c-Class enclosure

ProLiant BL 460c G1 and ProLiant BL 465c G1Server blades

P700mSAS mezzanine cards

3Gb SAS BL Switch, installed in interconnect bays 7 and 8SAS switch blades

MSA2000saExternal SAS storage enclosures

1. Change the Multi-initiator Mode setting to Enabled. This setting allows multiple servers to be

assigned the same zone group and have access to the same storage enclosure.

a. Access VSM and select the Zoning tab.

b. Select the switch and click Advanced Settings.

c. When prompted, expand the Multi-initiator Mode drop-down box and change the setting

to Enabled. Then, click OK.

NOTE: As shown in this example, if status alerts exist for an item selected in the navigation

tree, the View Status Alerts button is displayed.