Getting Started Guide

- Microsoft Internet Explorer 4.0 or later
- Netscape Communicator 4.5 or later
Minimum Recommended
----------------------- -----------------------
IBM PC or compatible 266MHz Pentium II 500MHz Pentium III
RAM 128MB 256MB or more
Free hard disk space 250MB 250MB
Graphics capabilities 1024x768 / 256 colors 1024x768 / 64K colors
CD-ROM drive Yes Yes
Network adapter card Yes Yes
===============================================================================
5. Supported Devices
===============================================================================
The following 3Com devices are fully supported by Router Manager 3.0.
Device Minimum Agent Version
Router 5009 1.10
Router 5231 1.10
Router 5640 1.10
Router 5680 1.10
Router 3012 1.10
Router 3013 1.10
Router 3016 1.10
Router 3015 1.20
Router 3018 1.20
Router 6040 2.01
Router 6080 2.01
Router 3030 2.01
Router 3031 2.01
Router 3032 2.01
Router 3033 2.01
Router 3034 2.01
Router 3035 2.01
Router 5012 2.10
Router 5232 2.10
Router 5642 2.10
Router 5682 2.10
===============================================================================
6. Known Problems
===============================================================================
1. SNMP must be enabled on the device before Router Manager can connect to
the device. SNMP can be enabled using the "snmp-agent" command. Note
that the default SNMP V1 community strings defined in the
System->Authentication Options dialog must match those configured on
the device.