Owner manual

To store into a You can define a portion of a sketch inside a box, and then
graphics store that graphic into a graphics variable.
variable
1. In the Sketch view, display the sketch you want to copy
(store into a variable).
2. Press {{STO^}}. Highlight the variable name you want to
use and press {{OK}}.
3. Draw a box around the whole screen or around the
portion you want to copy: move the cursor to one corner,
press {{OK}}, then move the cursor to another corner and
press {{OK}}.
To recall a
graphics
variable
1. Open the Sketch view in the destination aplet.
2. Press I VAR I {{HOME}}. Highlight Graphic, then press
and highlight the name of the variable (G1, etc.).
3. Press {{VALUE}} {{OK}} to recall the contents of the
graphics variable.
4. Move the box to where you would like to copy the graphic,
then press {{ok}}.
The Notepad
You can store as many notes as you want in the Notepad
(■ {NOTEPAD}). These notes are independent of any aplet.
The Notepad catalog lists the existing entries by name . It does
not include notes that were created in Note view (■ {NOTE}).
IHDTE CBTftLDGi
TO DO
PHONE NUMBERS
nMUzmii
Getting Started 1-23