Owner manual

DRAW Keys
Key
Meaning
{{DOT-f}},
Dot on, dot off. Turns pixels on/off as crosshairs
{{DOT-}} move.
{{LINE}}
Draws a line from the cursor’s starting position
to the point at which you press {{ok}}. You can
draw a line at any angle by moving the cursor.
{{BOX}}
Draws a box from the cursor's starting position
to the point at which you press {{OK}}.
{{CIRCL}}
Draws a circle. The cursor’s starting position is
the center of the circle. The cursor’s ending
position (when you press {{ok}}) defines the
radius.
To label parts 1. Press {{TEXT}} and type the text in the edit line. To lock
of a sketch the Alpha shift on, press {{A...Z}} (for uppercase) or
■ {{A...Z}} (for lowercase).
2. To make the label a smaller character size, turn off
{{BIG«}}. (Pressing {{BIG}} turns on {{BIGh}} and vice-
versa.) The smaller character size cannot display
lowercase letters.
3. Press {{OK}}. Use the arrow keys to position the label where
you want it.
4. Press {{OK}} again to affix the label.
5. Press {{DRAW}} to continue drawing, or press | home | to
exit Sketch view.
To create a set You can create a sequence of up to ten sketches. This allows
of sketches for simple animation.
« After making a sketch, press {{NEWP}} to add a new, blank
page that will follow the current page. You can now make
a new sketch. The new image becomes part of the current
set of sketches.
® To view the next sketch in an existing set, press
{{PAGET}}. Hold {{PAGET}} down for animation.
® To remove the current page in the current sketch series,
press [on |.
1-22 Getting Started