Owner manual

3. Type your program name, then press {{ok}}.
When you press {{OK}}, the Program Editor opens.
4. Enter your program. When done, start any other activity.
Your work is saved automatically.
To enter Until you learn the abbreviated spelling for the HP 38G
commands commands, the easiest way to enter commands is to use the
Math menu from the Program editor.
1. From the Program editor, press [ math | {{cmds}}.
2. On the left, highlight a command category, then press 0.
l»9W««««M0-rr.rri ikii>
COMMANDS
flplet ■ CHECK
Branch
SELECT
Drawing
SETVIEWS
Graphic V
UNCHECK
1 moisiiSBisi
4. On the right, highlight a command, then press {{OK}}.
PRBGRAM CDMMftNDS
Bplet I CHECK
SELECT
Branch
Drawing
Graphic
ETVIEW
UNCHECK
lEEEHlBnai
To save a There is no need to save your program. As you work, your
program program is saved automatically under the program name you
specified.
8-4 Programming