Owner's Manual
Table Of Contents
- Getting started
- Getting to know your computer
- Connecting to a network
- Enjoying entertainment features
- Using the camera
- Using audio
- Using video
- Connecting a DisplayPort device using a USB Type-C cable (select products only)
- Connecting a Thunderbolt device using a USB Type-C cable (select products only)
- Connecting video devices by using a VGA cable (select products only)
- Connecting video devices using an HDMI cable (select products only)
- Connecting digital display devices using a Dual-Mode DisplayPort cable (select products only)
- Discovering and connecting to Miracast-compatible wireless displays (select products only)
- Using data transfer
- Navigating the screen
- Maintaining your computer
- Securing your computer and information
- Troubleshooting
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Backing up, restoring, and recovering
- Operating specifications
- Electrostatic discharge
- Accessibility
- Support information
- Index
Table 8-6 Speaker symptoms and solutions
Symptom Possible solution
Volume is very low or
unsatisfactory
Be sure that you connected the speakers to the audio-out (black) jack on the back of the computer. (Additional audio
jacks are used for multiple-channel speakers.) Detached nonpowered speakers (speakers without a separate power
source, such as batteries or a power cord) do not produce satisfactory sound. Replace the nonpowered speakers with
powered speakers.
No sound is produced 1. Type control panel in the taskbar search box, and then select Control Panel. Select System and Security.
2. Under Security and Maintenance, select Troubleshoot common computer problems, and then select Playing
Audio.
Be sure that you connected powered speakers and that they are turned on.
Turn o your computer, and then disconnect and reconnect the speakers. Be sure that the speakers are connected to
an audio jack, not a microphone or headphone jack.
To resume from Sleep mode, press the Sleep button (select products only), or press esc.
Unplug headphones if they are connected to your computer (or speaker system).
Internet access
If you have internet access problems, refer to the following table for possible solutions.
Table 8-7
Internet access symptoms and solutions
Symptom Possible solution
Cannot connect to the
internet
1. Right-click the network status icon in the notication area, at the far right of the taskbar.
2. Select Troubleshoot problems.
Verify that you are using the proper cables for your internet connection type. Your computer might have a dial-up
modem and an Ethernet network adapter (also called a network interface card, or NIC). A modem uses a standard
telephone cable, whereas the network adapter uses a network cable, to connect to a local area network (LAN). Do not
connect a telephone cable to the network adapter, and do not connect a network cable to a telephone line; doing so
might damage the network adapter.
Run the wireless setup wizard.
1. Type control panel in the taskbar search box, and then select Control Panel. Select Network and Internet,
and then select Network and Sharing Center.
2. In the Network and Sharing Center window, select Set up a new connection or network to open the wizard, and
then follow the on-screen instructions.
If your system has an external antenna, try moving the antenna to a better position. If the antenna is internal, try
moving the computer.
Try to connect again later, or contact your ISP for assistance.
Cannot connect to the
internet but there is no
error message
1. Right-click the network status icon in the notication area, at the far right of the taskbar.
2. Select Troubleshoot problems.
No network connection
icon in the notication area
1. Type repair in the taskbar search box, and then select Identify and repair network problems.
2. Follow the on-screen instructions.
Internet access 35