Owner's Manual
Table Of Contents
- Getting started
- Getting to know your computer
- Connecting to a network
- Enjoying entertainment features
- Using the camera
- Using audio
- Using video
- Connecting a DisplayPort device using a USB Type-C cable (select products only)
- Connecting a Thunderbolt device using a USB Type-C cable (select products only)
- Connecting video devices by using a VGA cable (select products only)
- Connecting video devices using an HDMI cable (select products only)
- Connecting digital display devices using a Dual-Mode DisplayPort cable (select products only)
- Discovering and connecting to Miracast-compatible wireless displays (select products only)
- Using data transfer
- Navigating the screen
- Maintaining your computer
- Securing your computer and information
- Troubleshooting
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Backing up, restoring, and recovering
- Operating specifications
- Electrostatic discharge
- Accessibility
- Support information
- Index
2. On the Playback tab, select the name of the digital output device.
3. Select Set Default, and then select OK.
Return audio to computer speakers
Follow these steps to return the audio stream to the computer speakers.
1. Right-click the Speakers icon in the notication area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select Speakers.
3. Select Set Default, and then select OK.
Connecting digital display devices using a Dual-Mode DisplayPort cable (select
products only)
The Dual-Mode DisplayPort connector connects a digital display device such as a high-performance monitor
or projector. Dual-Mode DisplayPort delivers higher performance than VGA and improves digital connectivity.
NOTE: To connect a digital display device to your computer, you need a Dual-Mode DisplayPort (DP-to-DP)
cable, purchased separately.
1. Connect one end of the Dual-Mode DisplayPort cable to the Dual-Mode DisplayPort connector on the
computer.
NOTE: Your connector might look slightly dierent from the illustration in this section.
2. Connect the other end of the cable to the digital display device.
3. Press the Windows key + p to cycle through one of four display states:
● PC screen only: View the screen image on the computer only.
● Duplicate: View the same screen image simultaneously on both the computer and the external
device.
Return audio to computer speakers
19