Specifications

2-31
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 2 Device Management: Adding Clean Access Servers, Adding Filters
Integrating Cisco ISE Profiler
Display/Edit/Delete Cisco ISE Profiler Details
You can view the list of ISE Profilers added, edit the configuration details, or remove ISE Profiler using
the List page.
Step 1 Navigate to Device Management > Filters > Configuration > Profiler > List.
Figure 2-14 List of ISE Profiler Details
Step 2
You can update the following:
• Choose the Role of the ISE Profiler as Primary or Secondary from the dropdown.
• Click the Edit icon next to the ISE Profiler Name to modify the details.
• Click the checkbox preceding the ISE Profiler Name and click Delete Selected to remove a Profiler.
Step 3 Click Update to save the changes. Click Refresh to revert to the previous settings.
Note You can designate only one Profiler as "Primary" at a time. Other profilers are designated as secondary.
While synchronizing with ISE, if NAC fails to connect to the Primary, it tries to connect to the available
Secondary Profiler in a sequence.