Specifications

2-30
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 2 Device Management: Adding Clean Access Servers, Adding Filters
Integrating Cisco ISE Profiler
Add Cisco ISE Profiler Details
Step 1 In the CAM Web Console, navigate to Device Management > Filters > Configuration > Profiler >
New.
Figure 2-13 Adding ISE Profiler Details
Step 2
Enter the Cisco ISE Profiler details as follows:
• Profiler Name – Enter any descriptive name for the Cisco ISE Profiler.
• Address (IP/DNS) – Enter the IP Address or the DNS Name of the Cisco ISE.
• Admin User Name – Enter the admin user name of Cisco ISE.
• Password – Enter the Password.
Step 3 Click Add to save the configuration details.
Note By default, the first ISE Profiler added to CAM is recognized as the “Primary” Profiler and the other ISE
Profilers added are saved as “Secondary” Profilers. You can change this setting in Device Management
> Filters > Configuration > Profiler > List. See Display/Edit/Delete Cisco ISE Profiler Details,
page 2-31.