Specifications

2-25
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 2 Device Management: Adding Clean Access Servers, Adding Filters
Global Device and Subnet Filtering
Figure 2-9 Order
2.
Click the arrows in the Priority column to move the priority of the wildcard/range filter up or down.
3. Click Commit to apply the changes. (Click Reset to cancel the changes.)
Note For more information on In-Band vs. Out-of-Band client machine behavior based on specified Device
Filter type, see In-Band and Out-of-Band Device Filter Behavior Comparison, page 2-16.
Test Device Filter Policies
The Test page control allows administrators to determine which device filter and access type will be
applied to the specified MAC address for a particular Clean Access Server.
1. Go to Device Management > Filters > Devices > Test.
2. Type the MAC address of the device in the MAC Address field.
3. Choose CAS to test against from the Clean Access Server dropdown menu.
4. Click Submit. The Access Type specified for the corresponding device filter appears in the list
below.
Figure 2-10 Test