Specifications

2-20
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 2 Device Management: Adding Clean Access Servers, Adding Filters
Global Device and Subnet Filtering
Configure Device Filters
This section describes the following:
• Add Global Device Filter
• Display/Search/Import/Export Device Filter Policies
• Edit Device Filter Policies
• Delete Device Filter Policies
Add Global Device Filter
If there is a MAC address entry in the Device Filter list, the machine can also be checked per Cisco NAC
Appliance policies (e.g., Agent-based checks, network scanner checks). The device is authenticated
based on MAC address but will still have to go through scanning (network and/or Agent).
A device filter set up as described in the following steps applies across all Clean Access Servers in the
CAM domain.
Note For more information on In-Band vs. Out-of-Band client machine behavior based on specified Device
Filter type, see In-Band and Out-of-Band Device Filter Behavior Comparison, page 2-16.
Step 1 Go to Device Management > Filters > Devices > New.