Specifications

14-55
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Admin Users
Figure 14-40 Administrator User Access Restrictions
Step 2
Check the Enforce IP Access Restriction checkbox.
Step 3 In the IP Restriction White List box, enter the IP Addresses to be allowed by the CAM and CAS. Type
one address per line.
Step 4 Click Update.
Step 5 Both the CAM and CAS are enabled with the list of IP Addresses provided.
Note The access list is applied only to the CAS that is already added to the CAM.
Note If you uncheck the Enforce IP Access Restriction checkbox, the IP addresses provided in the list
become inactive. The access restriction is not enforced.
Caution If you click Update when the IP Restriction White List field is empty, the CAM/CAS are made
inaccessible via web console or SSH. If this happens, you can use the following procedure to unlock
CAM/CAS access again.
The following procedure provides instructions on how to unlock the CAM web console. You need to use
the Serial Console or keyboard/monitor to access the CAM.
Step 1 Delete the contents of the /perfigo/control/apache/conf/sslacc.conf file in CAM.
Step 2 Run the command /perfigo/control/bin/startapache_g in CAM.
Step 3 This will unlock CAM web console.
Step 4 Login to the CAM web console, edit the access restriction list, and click Update.