Specifications

14-37
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
Perform Manual Sync
Step 1 On the Master CAM, make sure only the policies you want to manually sync are enabled on Configure
Master (Figure 14-15) page. Make sure to click the Update button if changing the settings.
Step 2 On the Master CAM go to Administration > CCA Manager > Policy Sync > Manual Sync
(Figure 14-22)
Figure 14-22 Manual Sync
Step 3 All configured Policy Receivers appear under the Receiver Host Name/IP column on the page.
Step 4 In the Sync Description text box, type an optional description for the manual sync to be performed. The
description labels the manual sync in the Logs on the History page.
Step 5 Click the Manual Sync checkbox for each Receiver CAM to which you want to export polices.
Step 6 Click the Sync button. The pre-sync check screen appears (Figure 14-23).
Figure 14-23 Manual Sync (Authorization Check)
Step 7 Click the Continue button to complete the manual Policy Sync. If successful, the following screen
appears (Figure 14-24).