Specifications

14-36
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
– Click the View icon to bring up the Certificate Authority Information dialog
– Copy the DN entry (Figure 14-21).
Figure 14-21 Copying the DN Information from the Master CAM
b. On the Receiver CAM, navigate to Administration > CCA Manager > Policy Sync > Configure
Receiver.
c. Paste the DN from the SSL certificate of the Master CAM in the Authorized Master text box
(Figure 14-20).
Step 3 Click Update.
Perform Policy Sync
You can schedule automatic sync of policies at specific time interval once every x number of days. You
can also manually sync policies at any time. You must be logged in as a Full-Control Admin user to the
Master CAM in order to perform automated or manual policy sync.
The Master configuration completely overrides (and clears) the existing Receiver configuration for the
policies that are configured for Policy Sync, such as OOB profiles or user roles. Policies/configurations
that are not subject to Policy Sync are otherwise left alone on the Receiver CAM after a Policy Sync.
Note that when Rules are pushed during a Policy Sync, all associated Checks are automatically pushed
as well.
Policy Sync results (manual or auto) are logged on the History page for each Master and Receiver CAM.
In addition, Auto Sync results are logged in the Master CAM’s Event Logs.
Note The Cisco Updates on the Master override any updates on the Receiver. Therefore, Cisco recommends
that you configure auto update settings on the Master (under Device Management > Clean Access >
Updates > Update) to ensure the Master has the latest Cisco Updates before performing a Policy Sync.